https://peertube.watch/videos/watch/3c61e992-7e4d-4711-a465-584cc47d0956 Is an ASIC made with fully open source tool chain possible ? Is it affordable ? The Chips4Makers project tries to make low volume ASICs possible for makers and hobbyists. The talk will start with a summary and vision of the Chips4Makers project. In a second part of the talk the current state of the used tool chain will be discussed. With the Retro-uC project this tool chain is tested and it will be presented what worked and what is candidate for improvement. I do hope I can get feedback from the public and get more inspiration to improve the toolchain in use for future user projects. The Retro-uC chip itself - a microcontroller with the right instruction set for a retrocomputing enthusiast - is discussed in a talk in the retrocomputing devroom. Speaker: Staf Verhaegen, Track: CAD and Open Hardware, Room: K.4.201, When: Saturday 3 February 2018, 13:30–13:55 (Brussels time), Schedule: FOSDEM 2018 event page, Slides & links The Chips4Makers blog, Hackaday Retro-uC project page, Licence: Creative Commons Attribution 2.0 Belgium (CC BY 2.0 BE) (as stated in the FOSDEM video archive). Attribution: “The open source EDA tool chain for the Chips4Makers project” by Staf Verhaegen, FOSDEM 2018. Original recording: 2018/K.4.201/cad_os_asic.webm from the FOSDEM video archive. This channel is an unofficial mirror; FOSDEM is a free and non-commercial event organised by the community for the community. Sun, 11 Oct 2026 02:56:51 GMT https://validator.w3.org/feed/docs/rss2.html PeerTube - https://peertube.watch https://peertube.watch/lazy-static/avatars/3b284627-b75f-409e-ac2e-10f4c2946f43.png https://peertube.watch/videos/watch/3c61e992-7e4d-4711-a465-584cc47d0956 All rights reserved, unless otherwise specified in the terms specified at https://peertube.watch/about and potential licenses granted by each content's rightholder.